Color :

Color

- +

Produces a glossy, metallic-like surface finish.
Ideal for smooth, decorative, and presentation prints.
No post-processing needed for high shine.

Everfil™PLA silk is a biodegradable and environmentally friendly printing filament derived from renewable sources such as corn starch and sugar cane. It is one of the most popular filaments in the 3D printing market due to its ease of printing, low melting point and ability to produce smooth and accurate prints. Everil™PLA N01 is characterised by excellent adhesion to the printer substrate, low shrinkage and a wide range of colours and finishes available.

Applications

1. 1. Education and hobbies – With its ease of printing, the Everfil™PLA N01 is an ideal choice for beginners, students and hobbyists looking to explore the world of 3D printing.
  2. Prototyping – Its accuracy and print quality make it a frequent choice for designers and engineers to create prototypes and models.
  3. Decorations and gadgets – Due to its variety of colours and finishes, Everfil™PLA N01 is an excellent choice for printing decorative items, jewellery, toys or other gadgets.
  4. Tools and accessories – It can be used to print simple tools, handles, housings or other practical everyday objects.
  5. Educational models – Thanks to its properties, Everfil™PLA N01 is often chosen for the production of anatomical, geographical or scientific models used in education.

Physical properties	Typical value	Unit	Measurement method
Density	1.24	g/cc	ASTM D792
Tensile modulus / Tensile modulus	3.6	MPa	ASTM D882
Flexural Tensile Strength / Flexural Modulus	83	MPa	ASTM D790
Impact strength according to ISOLD / Notched Izod Impact Strength method	16	J/m	ASTM D256
Tensile modulus	3.8	MPa	ASTM D790
Heat distortion temperature / Heat Distortion Temperature	55–60	°C	ASTM E2092
Food approval / Food contact approved	YES	–	EU No 10/2011
RoHS compliance	YES	–	Directive (EU) 2011/65

Parameters	Typical value	Unit
Nozzle temperature	190–220	°C
Table temperature	50–70	°C
Print speed	50–100	mm/s
Layer thickness	0.1–0.3	mm
Table grip	Blue Painter’s Tape or BuildTak	–
Cooling	On (50–100%)	–
Filling	20–30	%
Support material	Not required	–
Retraction speed	40–60	mm/s
Retraction value	1–3	mm
Heat chamber	Not required	–